Tilt Switches and Inclinometers: Trigger Detection vs. Angle Measurement
A tilt switch and an inclinometer do different jobs. A tilt switch gives an on/off signal when a set tilt is reached. An inclinometer reports a continuous angle value. If you only need to know that a threshold was crossed, a tilt switch can do that. It will not tell you the angle itself.
How GBeeLee Tilt Switches Work
GBeeLee's tilt range includes roll-ball angle switches, photoelectric tilt switches, and vibration sensing elements. Roll-ball switches are available for commonly requested trigger angles; the company can also customize the angle and adapt the mounting. Once installed, the switch typically opens or closes a circuit after the device tilts past that angle. In the heating-appliance case GBeeLee describes, the switch cut power when the unit tipped and restored power when it was upright again. That is a safety or control action, not a measurement.
Configuration Options and Their Consequences
These roll-ball switches can be set for single-direction, double-direction, or multidirectional detection, and the conductive or open state depends on how the part is installed. Keep the model and its reference orientation together. In every case the output stays binary: the switch only says whether the threshold has been passed. That suits interlocks, alarms, or simple position detection. It does not suit work that needs a numerical angle or a continuous reading.
When a Tilt Switch Is Not Enough
If you need the actual angle, look at an angle sensor or inclinometer. If a threshold action is enough, review GBeeLee's trigger and mounting options with the supplier.
Vibration Switch Selection for Tap-Activated Toys
Mounting Orientation for Roll-Ball Tilt Switches