Tel \ WeChat \ Whatsapp: +86 135 3288 4528

Work Time: Mon-Sat: 8:00am to 18:00pm

0
image
image
image
image
spring vibration switch

SW-18010P Factory Price Vibration Switch Spring Switch Tilt Sensor Switch

SW-18010P
SW-18010P vibration switch with motion wake up function for Mosquito killer lamp shake, which is the high sensitive and miniature shaking switch. It is the sealed and waterproof switches.
Quantity:
Contact Now
add to cart

SW-18010P is a spring-type, omnidirectional vibration switch. Inside the sealed case a conductive spring rests in the open position; when external impact, movement or centrifugal force reaches the rated trigger level, the spring touches the electrode and the contact closes. As soon as the force disappears, the contact returns to open. The sensing element is purely mechanical, so it needs no supply voltage and draws no standby current — only the detection circuit consumes power, and only while the contact is closed.

Key Specifications

  • Circuit voltage: 1–6 V
  • Switching current: 2 µA – 10 mA
  • Conduction time: approx. 2 ms
  • Conduction mode: intermittent (non-continuous)
  • Open-contact resistance: > 10 MΩ
  • Operating temperature: −40 °C to +85 °C
  • Terminal pull strength: 300 gf for 1 minute
  • Salt-spray test: 95 % RH at 40 °C for 24 hours
  • Operating life: 200,000 cycles at < 5 Hz
  • Packing: 1,000 pcs per bag

Key Features

  • Omnidirectional triggering — responds at any mounting angle, so no orientation setup is needed on the assembly line
  • Spring-type element with high trigger sensitivity
  • Open at rest, momentary closure when vibration or centrifugal force reaches the threshold
  • Models ending in"P"are fully sealed (SW-18010P, 18015P, 18020P, 18025P); the non-P versions use the standard package
  • RoHS compliant and mercury-free — a direct replacement for mercury tilt switches
  • Same series also covers SW-18015, SW-18020, SW-18025 and SW-18030 for different trigger levels

Typical Applications

  • Vibration and movement detection in electric toys, riding equipment and fitness devices
  • Shock and tamper detection on meters, vending machines and portable equipment
  • Wake-up triggering for battery-powered circuits, where zero standby current matters
  • Motion sensing on small appliances and low-cost control boards

Why Buy from GBeelee

GBeelee is the export brand of Dongguan Bailing Electronics, a national high-tech enterprise that has manufactured sensors for more than 18 years and serves over 20,000 customers. Production is RoHS compliant, and OEM/ODM support is available for custom leads, housings and sensitivity.

Related product lines:Spring-type vibration switches·Full vibration sensor range

FAQ

Does the switch need a power supply?
No. The sensing element is a passive mechanical contact with no quiescent current; only the detection circuit draws power, and only while the contact is closed.

What is the difference between the P and non-P versions?
Models ending in P are fully sealed. The non-P versions use the standard package and are intended for assemblies that are already protected from dust and moisture.

Does it respond to tilt as well as vibration?
It triggers from any direction, including when the mounted surface changes attitude, because the spring element is not orientation-dependent. The rated mechanism, however, is vibration and impact rather than a defined tilt angle — if you need a specific tilt threshold, use the BL-3300 series rolling-ball switches instead.

  • SW-18010P vibration switch with motion wake up function for Mosquito killer lamp shake, which is the high sensitive and miniature shaking switch. It is the sealed and waterproof switches.
  • Product name:Vibration switch
  • Model:SW-18010P
  • Max. Current::50MA
  • Max. Voltage::12V
  • Contact Resistance::<10 ohm
  • Insulation Resistance::>10M ohm
  • Temperature Range::-40to 80°C
  • Pull force of terminal::500gf for 1 minute
  • Humidity::95% RH, 40°C for 96 hours
  • Operating lifespan::100,000 cycles
  • Place of Origin:CN;GUA
  • Brand Name:Beelee
  • Model Number:SW-18010P

Product Description

Factory price vibration switch spring switch tilt sensor switch

SW-18010P_01SW-18010P_02SW-18010P_03

Main Switch kindTilt switch,vibration switch,motion sensor,optical switch,reed switch
Applicationhousehold appliances,toys,alarm system ,
MOQ1000pcs/Model
Delivery1-3days for samples, 7-10days for mass order
CertificationCE, ROHS

SEND MESSAGE